When it comes to smoking weed, you have a lot of options. There are countless varieties of marijuana pipes out there. The most common and popular weed pipes are made out of glass, wood, and metal. After using your pipe a couple of times, it can get pretty dirty and clogged up with grime and soot, which makes it difficult and very unpleasant to use. One of the main reasons that hand pipes are so popular because they are effortless to clean, and you can use standard household materials for it.

1. How To Clean A Crack Pipe With Rubbing Alcohol How To
2. How To Clean A Crack Pipe With Rubbing Alcohol Vinegar
3. How To Clean A Crack Pipe With Rubbing Alcohol Recipe
4. How To Clean A Crack Pipe With Rubbing Alcohol
5. How To Clean A Crack Pipe With Rubbing Alcohol &

In this article, we will talk about how to clean a pipe in the most effective ways and discuss different types of hand pipes and their pros and cons.

What Alcohol To Use When Cleaning Pipes. Your choice of alcohol really comes down to personal preferences. Rye, corn or even rubbing alcohol are all fine and will do the job perfectly. However, some people prefer to use liquor for cleaning their pipes.

Contents

• 1 HOW TO CLEAN A GLASS PIPE
• 4 KNOW YOUR PIPES
  • 4.1 Materials
  • 4.2 Types of Hand Pipes

HOW TO CLEAN A GLASS PIPE

The basic principle behind cleaning a dirty pipe is using a scrubbing agent with a solvent. Regular or Kosher salt or baking soda works really well as a scrubbing agent. You can use rubbing alcohol, acetone, vinegar, or pipe cleaner as a solvent.

Method # 1 – Cleaning Glass Pipes Using Rubbing Alcohol & Salt

ESSENTIALS

For this method you will need the following:

• Dirty Pipe
• Rubbing alcohol /Acetone
• Table Salt
• Electrical tape (Optional)
• Water

Step # 1

Use the electrical tape to seal off the bowl and any other holes except the mouthpiece. If you don’t have electrical tape, then you can use your fingers to block the holes.

Step # 2

Grab the salt and put some inside the pipe through the mouthpiece. Do not fill it all up with the salt.

Step # 3

Now add the rubbing alcohol. If you also use acetone or nail polish remover instead. Make sure that you don’t fill it all up with the solvent. Leave some room inside for the cleaning solution to move around freely.

Step # 4

Seal the mouthpiece off with the electrical tape or block it with your thumb. Now shake the pipe. If you clean your pipe regularly, then 2/3 mins of shaking should do the job, or you might need to shake it for longer.

Step # 5

Remove the tape and rinse it out with tap water.

Method # 2 – Cleaning Glass Pipes Using Pipe Cleaner

ESSENTIALS

For this method you will need:

• 1 Ziploc bag
• 1 Bottle of pipe cleaner
• Dirty pipe

Step # 1

Place your dirty pipe in the Ziploc bag.

Step # 2

Pour the pipe cleaner into the bag. Make sure that you have enough liquid in there so you will be able to submerge your pipe. Now squeeze out the excess air and seal the bag up. You can also use coarse salt and rubbing alcohol instead of the pipe cleaner.

Step # 3

Start shaking the bag. You will start noticing that the pipe cleaner changes color and turning darker.

Step # 4

Take the pipe out of the bag and rinse it with warm water and wipe it down with a paper towel.

Method # 3 – Cleaning Glass Pipes Without Rubbing Alcohol & Pipe Cleaner

ESSENTIALS

If you don’t want to use alcohol or pipe cleaner then this method is perfect for your. For this method, you will need the following items:

• 1 Dirty pipe
• 1 Q-tip
• Water
• 1 Pot to boil water

Step # 1

Place a pot on the stove and boil some water. Make sure you have enough water to cover the pipe.

Step # 2

Submerge the pipe when the water simmer to boil. As the pipe boils, the water will evaporate. Make sure the water doesn’t evaporate entirely, or your pipe will crack. Allow your pipe to soak in the simmering water for 20-30 mins.

Step # 3

Remove the pot from the oven and drain the water. DO NOT put it under cold water, or the pipe will shatter. You can now hold the pipe with a kitchen mitt and use the Q-Tip to clean the chamber and the hole in the center to clean the remaining residue.

HOW TO CLEAN A METAL PIPE

ESSENTIALS

For this method you will need the followings:

• 1 Ziploc bag
• Rubbing alcohol
• 1 Dirty metal pipe
• Some Q-tips

Step # 1

First dissemble your metal pipe.

Step # 2

Place all the parts of your metal pipe in the Ziploc bag.

Step # 3

Pour some rubbing alcohol in to the bag and seal it.

Step # 4

Shake the bag well for 2-5 minutes. Let the parts soak in the alcohol for few hours if possibly then overnight.

Step # 5

Take the parts out of the bag. Use the Q-tips to clean the inside of the cylinders to get rid of the excess residues.

HOW TO CLEAN A WOODEN PIPE

ESSENTIALS

To clean a wooden pipe you will need the following tools:

• Q-Tips
• Paper towels
• Rubbing alcohol
• Pipe Cleaners & Scrapers
• Pipe Tool
• Olive oil or cooking oil

Step # 1

Take the stem off. Dip a pipe cleaner in the rubbing alcohol and run it through the shank into the bowl. /bookworm-deluxe-for-android-free-download-apk.html. It should pick up all the gunk.

Step # 2

Get another pipe cleaner. Dip it in the rubbing alcohol and this time run it through the stem.

Step # 4

Use the pipe tool or a pipe knife to clean the inside of the bowl. If the inside of your pipe bowl developed a heavy buildup of resins, then you will need to scrape them off with the pipe knife. Once you have finished scraping, wipe the inside with a Q-tip or pipe cleaner soaked in alcohol.

Step # 5

Lastly, put a little bit of olive oil or cooking oil on your paper towel and rub it on the outside of the bowl of your wooden pipe. It will give the pipe a nice shine.

KNOW YOUR PIPES

Materials

The most common material types for hand pipes are glass, wood, and metal, but the glass and the metal pipes are the most popular among the cannabis users. The pros of any pipes are that they are easy to clean, with no added taste, very easy to carry, and use.

Glass Pipes

Glass pipes are probably the most popular for smoking weed and provide better (smoother) smoke than wooden or metal pipes. They come in a variety of designs and vibrant colors. Fragile compare to the metal or wooden pipes, but the cleaning process is fairly simple.

Glass is non-porous, which means it holds all the smoke inside the pipe and provides a pure and clean flavor. Glass also reduces resin build-up, so you don’t have to worry about bacteria.

Wooden Pipes

Most people use wooden pipes to smoke tobacco, but they can be used for marijuana as well. Wooden pipes have a bigger bowl compare to glass pipes. The wooden pipes give you a natural and rich smoking experience by adding its signature to the flavor of your cannabis strain. Because of the complicated designs of wooden pipes, it can be time-consuming and hard to clean them.

Metal Pipes

Metal pipes are very similar to glass pipes. They are made from different types of materials such as nickel, brass, plated steel, or anodized aluminum. The bowls of metal pipes are usually screwed on to the stem. The chambers are well designed, so the smoke comes out very smooth. Metal pipes are durable and easy to clean.

Components

The common parts of every hand pipes are:

• Bowl – The bowl is where you pack the cannabis.
• Shank – The shank is a piece of the pipe that connects the stem and the bowl.
• Stem – Stem connects the mouthpiece to the shank.
• Mouthpiece – The mouthpiece is the part where you suck the smoke out of the pipe.

Types of Hand Pipes

Spoon

The spoon is probably the most basic hand pipe out there. You can usually find them at a gas station other than the smoke shops. It has a spoon-like shape. It also has a deep bowl and a carb on the side. The short stem of this pipe makes it very easy to smoke, but you also get dry and harsh smoke because there is not a lot of filtration. The hole in the center is very tiny and clogged up with resin very easily.

It is an excellent pipe for the beginners, that takes smoking down to its basics.

Cons

• Clogs easily
• No filtration
• Dry harsh smoke

Gandalf

Gandalfs are very long ornate hand pipes named after everyone’s favorite fantasy character Gandalf, the wizard from the movie Lord of the rings. You get a smoother smoking experience because of its long stem, which kind of filters the smoke as it goes from the bowl into your mouth.

Cons

• Fragile
• Not portable

Sherlock

This pipe was named after the famous detective Sherlock Holmes. One of the best things about a Sherlock is that it makes you feel like a detective solving a murder or a very thoughtful professor. The pipe looks precisely like the pipe of Sherlock Holmes with the curved design of an old school wooden tobacco pipe.

Pros

• Curved stem cools the smoke
• Classic design
• Easy to hold
• Comes with a bubbler to add water

Chillum

Chillum is a straight conical glass pipe traditionally made of clay used in India in the eighteenth century. These pipes are short and tiny and only hold a small amount of weed for one or two hits.

Cons

• Small
• Packs less

How To Clean A Crack Pipe With Rubbing Alcohol How To

Bubbler

Bubblers combine water pipe with a regular glass pipe. It uses water and a percolation system to filter smoke to ensure soft, smooth hits that you would expect from a bong. Fill the chamber with water, and the rest functions as a regular hand pipe.

Cons

• Fragile
• Hard to fill and drain water

Tuesday March 7, 2017

By Michael Walters

Anyone who has smoked out of a dirty pipe, bong or rig knows it's a rather unpleasant experience. While some people don't mind a dirty piece, it's generally accepted that routine glass cleaning is necessary.

Now you may already be aware of how to clean a bong or pipe, but we're going to break it down for you and answer one of the most common questions among glass owners: are specialty 420 cleaners better than isopropyl alcohol?

How To Clean A Crack Pipe With Rubbing Alcohol Vinegar

To maintain objectivity, we'll first briefly discuss some of the benefits each product brings to the table. Let's kick off the conversation with isopropyl alcohol. Arguably one of the most versatile sterilization cleaning solutions available, isopropyl alcohol, or iso for short, works great to clean flower resin or concentrate reclaim from glass surfaces.

Dragon iptv activation code free. §512 and the Digital Millennium Copyright Act (“DMCA”) for the reporting of alleged copyright infringement.

When purchasing iso from a store, be sure to look for the 91% variation, as it will work the best out of all the store-bought options. The high concentration of alcohol is perfect for cleaning out those pesky stains and residue build ups. When a piece is soaked in hot water beforehand, iso is even more effective. Using Epsom or rock salt in addition to iso is also a great way to safely clean a pipe or bong. Isopropyl alcohol usually retails for about $1.99 - $4.99 per bottle and is widely available at many department stores and pharmacies across the U.S.

They come in vibrantly colored, branded bottles and are most commonly available in head shops or online marketplaces. 420 cleaners work in a similar fashion as iso and break down residues left from concentrate or marijuana consumption. What's cool about 420 cleaners is that they come in a variety of options with differing active ingredients. This allows you to try different brands/types to find the best one for your needs. Some cleaners utilize isopropyl alcohol as the active ingredient, while others use compounds like ethyl alcohol or fully organic ingredients. The variety of brands and options available for specialty 420 cleaners is a big plus, however, these products range from $7.99 - $25.99, making them a bit pricey compared to simple iso.

Which product is better -- Isopropyl Alcohol or 420 Cleaners?

Ultimately, it's up to the specific consumer to choose which option suits their needs best, but there’s really no need to pour your money down the drain. In our extensive personal experience when discussing how to clean a bong or pipe, specialty 420 cleaners and iso are practically indistinguishable in effectiveness, making iso the obvious choice considering the difference in price.

How To Clean A Crack Pipe With Rubbing Alcohol Recipe

For anyone who doesn't have a bong already, consider browsing an online headshop like Grasscity. Buying from an online headshop is the perfect option for beginners looking for an affordable, functional glass bong. Plus, Grasscity was the world's first online headshop so they definitely know what they're doing.

How To Clean A Crack Pipe With Rubbing Alcohol

When selecting a bong from a site like Grasscity, try to utilize consumer reviews to see which option might be best for your individual needs. Because they've been around so long and are a trusted source for all types of cannabis accessories, Grasscity has culminated hundreds of consumer reviews on their products, making the selection process a breeze. Now, back to our discussion on isopropyl alcohol vs. specialty cleaners.

How To Clean A Crack Pipe With Rubbing Alcohol &

The availability of iso is also a big factor to examine. Head shops are awesome to visit, but they don't always have the most accessible hours. Isopropyl alcohol is available at many 24-hour retailers, so you never have to worry about running out or not being able to grab some in a pinch. On top of the difference in price and availability, iso is also much more discreet than 420 cleaners, which are clear indicators of someone's marijuana consumption. If you're trying to keep your stoner lifestyle on the DL, then iso is the product for you.

How to Clean a Bong, Pipe or Rig with Isopropyl Alcohol

#1: Gather your materials

The first step is to assemble everything you'll need for the process. Grab your piece (pour out the water if you're cleaning a bong, rig or bubbler), iso, slide/bowl/banger and a few q-tips. To make the process easy on yourself, you'll want to set up near a sink that has a pretty hot water output. Be sure to place your glass on a safe space not too close to the edge of the counter. Placing some paper towel or a rag down to avoid direct contact with your counter is a good option too.

Once you have assembled all of the necessary materials, it's time to get down and dirty. This isn’t the most exciting activity you'll do, but it’s an important part of maintaining your pieces and extending their longevity. Additionally, smoking or vaping out of a clean piece is much healthier and reduces the amount of impurities you intake into your body.

#2: Start cleaning

To begin the cleaning process, turn on your water source and allow it to get as hot as possible (or as hot as your hands can take). Once the water is heated, carefully fill your piece up with hot water. Be careful not to burn yourself during this process. Once the piece is filled, perform a thorough shaking to loosen up any resin present.

When it comes to cleaning glass, it's important to understand that concentrate reclaim and resin left from combusted flower are completely different forms of residue. Concentrate reclaim is generally easier to remove and reacts much better to hot water rinsing. If you're cleaning a rig with only concentrate residue, the hot water shake will remove most of the resin right off the bat.
Depending on how long it has been caked on, resin left behind from the combustion of marijuana flower is a bit trickier to remove. If it’s fresh resin, generally hot water and iso will work pretty effectively. However, if it has been left on for a while, some rock salt may be needed for an extra abrasive cleaning.

#3: Soak and shake.

Now that we've soaked and shaken our piece in hot water, it's time to move onto the actual cleaning. Pour out the hot water from your piece and be careful not to let any residue stick to your hands on the way out. Once all the water is drained, add your isopropyl alcohol. You'll want to add enough iso to cover the entire inside of the piece when shaken. If you're cleaning a piece containing only concentrate reclaim, all you will need is iso. If you're cleaning flower resin, do a quick assessment of how caked on the resin is. If it's on there pretty good, throw a little rock or Epsom salt into the mix. You don't need a ton, so use it as needed. Once you have your mixing agent in the piece, it's time to shake it up!

Shake your piece vigorously for several minutes, checking periodically to see how much residue is remaining. If all of the residue comes off cleanly within the first few minutes, you are on your way to an easy finish to the process. If after several minutes you still have residue caked on, try repeating the process. Pour out your isopropyl alcohol and re-rinse your piece with hot water. Pour some iso and rock salt back into your piece and shake extensively again. This process can be repeated as many times needed to get your piece spotless. If shaking is proving useless, you may need to soak your piece overnight. You can also use Q-tips or pipe cleaners to get at those hard-to-reach spots. Simply dip them in some iso and apply to the resinous spot. A little elbow work and you should be good to go.

#4: Rinse and enjoy a toke!

After every bit of residue has been cleaned off the glass, pour all of the iso and rock salt out of your piece and rinse thoroughly with hot water. Don't skimp on this process, any leftover iso could be harmful to consume. Shake and rinse your piece out several times with hot water until there is no leftover isopropyl alcohol.

By now, you’ve learned how to clean a bong, pipe or rig effectively. All that's left to do is to dry off your rinsed and fully clean piece, fill it with water if necessary, and enjoy some tasty tokes! Keeping your piece clean will not only give you cleaner hits but also extends the longevity of your glass. So to recap, don't waste your money on expensive 420 cleaners, use isopropyl alcohol and keep your pieces fresh, clean and ripping for years to come!

How often do YOU clean your glass?